Ultimate 2 Bluetooth Controller FAQ
Instructions for calibrating the joysticks/triggers:
Please follow the steps below:
1. Controller in the powered-on state, press and hold the LB+RB+Minus+Plus buttons for 8 seconds to enter the calibration mode, the Status LED will start to blink.
2. Push the joysticks to the edge and rotate them slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.
3. Press the same LB+RB+Minus+Plus buttons combination again to complete the calibration.
How to enable the zero-dead zone mode on the joysticks?
Please visit Ultimate-Software-V2 download the software to make adjustments.
Are the RGB lighting effects adjustable?
Yes, you can customize the RGB lighting effects using Ultimate Software V2. Visit Ultimate-Software-V2 download the software to make adjustments.
Is it possible for multiple controllers to pair and connect with one adapter?
No, each adapter can only support one controller connection at a time.
How to update the firmware of the 2C Bluetooth?
1. Turn off the 2C (Long press Home button)
2. Press and hold, L1 and R1
3. Turn on Ultimate Software V2 on your PC
4. Connect to your PC via wired
What joysticks are equipped on the Ultimate 2 Bluetooth Controller?
TMR Joysticks.