Ultimate 2 Wireless Controller FAQ
Instructions for calibrating the joysticks/triggers:
Please follow the steps below:
1. Controller in the powered-on state, press and hold the [LB + RB + Minus + Plus] buttons for 8 seconds to enter the calibration mode, the Status LED will start to blink.
2. Push the joysticks to the edge and rotate them slowly 2–3 times. Slowly press the triggers to the bottom 2–3 times.
3. Press the same [LB + RB + Minus + Plus] buttons combination again to complete the calibration.
How to enable the zero-dead zone mode on the joysticks?
In power-on state, press and hold the Minus (-) and Plus (+) buttons for 5 seconds to toggle the zero-dead zone mode on/off.
Are the RGB lighting effects adjustable?
Yes, you can customize the RGB lighting effects using Ultimate Software V2. Visit https://app.8bitdo.com/Ultimate-Software-V2 download the software to make adjustments.
Is it possible for multiple controllers to pair and connect with one adapter?
No, each adapter can only support one controller connection at a time.
Does it support the mobile version of the software?
No, it only supports the Windows/macOS version of Ultimate Software V2.
What joysticks are equipped on the Ultimate 2 Wireless Controller?
TMR Joysticks.
Is the Motion Control available on both Windows and Android?
Yes, it can be configured as the left joystick / right joystick through the Ultimate Software V2.